Jet Tools J-7040 User Manual
10” x 16” horizontal band saw, Operating instructions and parts manual
Advertising
Operating Instructions and Parts Manual
10” x 16” Horizontal Band Saw
Models J-7020, J-7040
WALTER MEIER (Manufacturing) Inc.
427 New Sanford Road
LaVergne, Tennessee 37086
Part No. M-414472
Ph.: 800-274-6848
Revision B 03/2012
www.waltermeier.com
Copyright © 2012 Walter Meier (Manufacturing) Inc.
This .pdf document is bookmarked
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- J-7020, J-7040 Horizontal Band Saw
- 1.0 Warranty and Service
- 2.0 Table of contents
- 3.0 Safety Warnings
- 4.0 About this machine and manual
- 5.0 Specifications
- 6.0 Machine setup
- 7.0 Electrical connections
- 8.0 Operating instructions
- 9.0 Work setup
- 10.0 Starting the Saw
- 11.0 Adjustments
- 12.0 Maintenance
- 12.1 Cleaning
- 12.2 Lubrication
- 12.3 Changing blades
- 12.4 Changing drive belt
- 12.5 Replacing drive motor
- 12.6 Adjusting counterbalance spring
- 12.7 Replacing drive wheel
- 12.8 Replacing idler wheel or idler bearing
- 12.9 Adjusting blade guides
- 12.10 Replacing carbide blade guide
- 12.11 Replacing guide bearings
- 12.12 Replacing blade edge bearings
- 12.13 Replacing wire brush
- 13.0 Troubleshooting the J-7020/7040 Band Saws
- 14.0 Replacement Parts
- 15.0 Electrical Connections