JVC KA-F5604U - Manual (Page 5)

5
Ⅵ By inserting this card into JVC’s color video camera
KY-F560, either composite video signal, component
video signal(Y/Cb/Cr), RGB signal or Y/C signal is
output.
Analog output
terminal
COMP/VBS OUT
Thank you for purchasing the KA-F5604U Analog output card.
COMP/VBS OUT
KY-F560 power must be switched off before mounting
the card.
1.
Remove two screws Å from the rear of the camera and
take out the slot cover.
2.
Insert this Analog output card into the slot at the rear of
the camera and secure it by screwing back the two
screws Å which were taken out earlier in the above
mentioned step
1
. .
KY-F560
Screw Å
Slot cover
Mounting this card to KY-F560 Camera
Slot
Analog output
terminal
Screw Å
This card
KY-F560
Notes
Ensure that the Analog output card is inserted
all the way in.
KA-F5604U_LWT0272-001A_6.5 05.2.23, 9:23 AM 5