John Deere STARFIRE RTK OMPFP11348 - Manual (Page 41)

900 MHz RTK—Original GreenStar Display
JS56696,00007F5 -19-15APR10-1/1
Vehicle Repeater
PC9148
—UN—20APR06
Press: SETUP button >> StarFire 3000 >> Differential
Correction Setup (D) >> RTK Setup (A)
Toggle (A) button next to RTK Operating Mode until
“VEHICLE REPEATER” appears in the cell.
In this mode the RTK vehicle radio not only receives
messages but also rebroadcasts them (similar to a RTK
repeater) to other RTK vehicles in close proximity.
NOTE: Vehicle Repeater is identical to the Vehicle
mode with the addition of having the radio
rebroadcast the RTK messages.
The Vehicle Repeater mode allows an RTK vehicle
to function normally as an RTK vehicle while also
transmitting the base correction signal to another RTK
vehicle that does not have line-of-sight to the base station.
The ‘Vehicle Repeater’ needs to be between the base
station and the ‘Vehicle’. The ‘Vehicle Repeater’ must be
able to communicate with the base station. The ‘Vehicle’
must then have either line of sight communication to the
base station or ‘Vehicle Repeater’.
IMPORTANT: There should be only ONE Vehicle
Repeater or Repeater in the same vicinity
with the same Network ID.
30-2 121511
PN=41