JOBO Spectator GSP040 - Manual (Page 21)

21
GB
For the formatting on MAC you do not need any additional program. The hard disk
must be formatted in the MS-Dos mode.
3.4.1 Installing Swissknife
Install the „Swissknife“ program on a computer with a Windows operating system
(WIN 2000, ME, XP). The installation is either automatic or after inserting the CD
you can activate the program with > Start / Execute / Jobo / Swissknife / and a
double click on „Swissknife.exe“. All the installation queries can be confirmed. The
computer may have to be re-started after the installation.
3.4.2 Prepare formatting
1. To be on the safe side unplug all connections to external hard disk drives.
2. Connect the SPECTATOR via the USB cable to the computer and switch it on (ON).
3. Open the „Swissknife“ program.
3.4.3 Formatting
The formatting is done in two steps:
1. Delete data
2. Format hard disk (Create)
IMPORTANT: Make sure that during all activities involving the formatting program
that the USB area (Devices) for the SPECTATOR has been selected. You should
under all circumstances avoid going to „Internal“ or „Primary“!
Click on „Delete“
The following queries can all be answered in the affirmative > Yes.