Jet Tools JWL-1220 - Manual (Page 4)

Accessories
Bed Extension
Adding the JWL-
1220BE 28” bed
extension expands the
JET JWL-1220
between center
capacity to nearly
50”, exceeding that of
many full-sized 12” lathes! The 3/4hp motor allows turning long pieces without concern.
The 28” bed extension (left) bolts up easily to the JWL-1220 bed. The
mating end of the extension bed (right) has adjuster screws that make
aligning the surfaces easy and accurate.
The JWL-1220BE 28” bed extension comes with the necessary hardware for installation
but goes a step further to make this process easy. A hanging plate on the mating end of
the extension makes aligning it to the JET JWL-1220 bed much easier when a second set
of hands are not available. The mating face also has hex head socket screws pre-installed
that make aligning the JWL-1220BE 28” bed extension perfectly much easier. Even the
rubber-cushioned feet on the bed extension are adjustable to be sure your newly
configured JET JWL-1220 remains stable on irregular surfaces.
Stand
Shown with the
extension kit installed,
the JWL-1220S stand
makes a very stable
platform for the JWL-
1220 lathe.
We offer the JWL-1220S stand that makes your JET JWL-1220
a rock-solid, stand-alone machine when bench space is not
available. Built from heavy walled square steel tubing with fully
welded plate steel joining plates, the JWL-1220S is beautifully
finished to retain its good looks while resisting corrosion for
many years to come.
The JWL-1220S comes with rubber tipped adjustable leveling
feet to dampen vibrations and resist moving. The lathe mounting
plates are adjustable so spindle height can be set to between 43
and 45” above the floor for maximum comfort.