JVC LT-32WX50EU - Manual (Page 62)

43
External Control
Functions Data
Turns on/off the monitor.
0: Off
1: On
+: Switches the power status.
Selects the input.
1: Input-1
2: Input-2
3: Input-3
4: Input-4
Adjusts the volume.
00 – 50: Sets the volume directly.
+: Turns the volume up.
–: Turns the volume down.
Turns muting on/off.
0: Mute is released.
1: The sound is muted.
+: Switches the mute status.
Selects an item of “ Setting Memory ”
(➔ page 13).
0: Memory1 / 1: Memory2 / 2: Memory3 /
3: Memory4 / 4: Memory5 / 5: Memory6 /
+, –: Changes the setting.
Selects the aspect ratio.
0: Panoramic , Panoramic Zoom /
1: 16:9 Zoom / 2: Full / 3: Regular , Slim /
4: Full Native / 5: 14:9 Zoom /
6: 16:9 Zoom Subtitle / 7: Just /
8: 1:1 / 9: Auto /
+, –: Changes the aspect ratio setting.
Sends the remote control code pass-through. 0x0000 – 0xFFFF †††
Sets the monitor ID. 0x80 – 0xFF
Enables/disables operations from the remote
control. 0: Disabled.
1: Enabled.
Enables/disables operations from the touch
sensor panel. 0: Disabled.
1: Enabled.
LINK 0F78
OPTION 0F0C
OK 030A
MENU 037A
037C
037B
035B
035A
BACK 03E6
EXIT 0F1D
RED 233C
GREEN 233D
YELLOW 233E
BLUE 233F
†††