JVC CA-MXG68V - Manual (Page 13)

– 8 –
English
To connect audio equipment with an optical digital
input terminal
You can record CD sound onto the connected digital
equipment.
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
DIGITAL OUT [OPTICAL] terminal.
Cancelling the Display Demonstration
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
On the unit ONLY:
To cancel the display demonstration, press DEMO.
When you press other buttons
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it by pressing DEMO.
To start the display demonstration manually
Press and hold DEMO again for more than 2 seconds.
Connecting Other Equipment
You can connect conventional audio equipment and TV.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect analog audio component
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
Connect the audio output jacks on the other equipment and
AUX IN jacks using an audio cords (not supplied.)
CANCEL
/DEMO
AUX IN
Audio equipment
To audio output
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your
area with the voltage selector on the rear of the unit.
• DO NOT plug in before setting the voltage
selector on the rear of the unit and all connection
procedures are complete.
Using a screw driver, set the voltage selector so that the arrow
on printed on the rear points the correct voltage where you
use this unit. (See the back cover page.)
220
127 240
110
230-
VOLTAGE
SETTING
VOLTAGE
SETTING
220
127
110
230-
240
R R
NOW, you can plug in the unit and other
connected equipment FINALLY!
DIGITAL OUT
OPTICAL [ ]
To optical
digital input
Before connecting the
other equipment,
remove the protective
plug from the terminal.
Audio equipment
with an optical digital
input
Protective
plug
To video input
TV
To connect the TV
Connect the video input jacks and the VIDEO OUT jack on
the rear using a video cord (supplied.)
VIDEO
OUT
EN01-12.CA-MXG65V&68V[US]_f 01.5.17, 5:07 PM 8