Jensen JMC-670 User Manual
Page 7
PROGRAMMING MP3 TRACKS
With this function you can program up to 10 titles in the order you desire.This function can only be done
in stop mode.
1.Press the MEMORY Button
(7/H6),“ FOLDER” indicator and ‘
’ blink, and ‘
’ / MEMORY
indicator appears in the display.
2. Select the desired folder by pressing FOLDER UP or DOWN button (6/H12,&H8).The selected folder
blinks.
3.Press the MEMORY Button
(7/H6) again to enter the selected folder.Then press
/
Buttons
(11/H7)to select your desired track.The selected track blinks.
4. Press the MEMORY Button
(7/H6) again to enter the selected track.The program number advances to
‘
’.
5. Repeat 2 to 4 to program additional tracks,10 tracks can be memorized.
6. Press PLAY/PAUSE
Button to start playing the tracks in your programmed order.
7.To clear the programmed tracks, press STOP
Button until the MEMORY indicator disappear.
ID3 DISPLAY (FOR MP3-CD ONLY)
This unit can support ID3 display when play the MP3-CD (if the MP3-CD have this information in the disc).
Press button ID3(5/H2) once, the ID3 icon will appear on the LCD display, and the title of the song, artist and
the album will show on LCD display by rolling, press this button again to resume to show the folder and track
number, the ID3 icon will disappear.
2. Select the desired track by pressing the
/
Button (11/H7) to select the track you want to program.
3. Press the MEMORY Button (7/H6) again to enter the selected track in program memory #1. The program
number
advances to.
4.Repeat steps 2 & 3 to program addiitonal tracks, 20 tracks can be memorized.
5.Press PLAY/PAUSE
Button to start playing the tracks in your programmed order.
6.To clear the programmed tracks, press STOP
Button until the MEMORY indicator disappear.
Note: Random functions are disabled in program play.
Notes on CD-R/RW Discs
Because of non-standardized format definition/production of CD-R/RW/MP3-CD, playback quality and
performance
are not guaranteed.
Manufacturer is not responsible for the playability of CD-R/RW/MP3-CD due to recording conditions
such as PC performance, writing software, media ability, etc.
Do not attach a label or seal to either side of the CD-R/RW/MP3-CD disc. It may cause a malfunction.
RADIO OPERATIONS
RADIO TUNING
1. Press the
Button (10/H1) to turn on the unit.
2. Press the Function Button (3/H3) to operate the unit in
radio mode.
E-11
E-12
JMC-670 INSTRUCTION MANUAL
8 11
11 7
7
4
4
11 7
6
6
15
9
11 7
STOP
HX-1056M3 IB JENS 001 REV0.P65
7/20/2005, 2:55 PM
7
JMC-670 INSTRUCTION MANUAL