JVC BR-DV3000 - Manual (Page 48)

E-48
PLAYBACK
–
Repeat playback
–
This unit is capable of 3 types of repeat playback.
The repeat playback function is set via the REPEAT MODE item of the SYSTEM (1/2) menu.
TAPE END
VIDEO END
Playback
INDEX
Rewind
Index signal
Beginning of tape End of tape
Index signal
– – – S Y S T E M [ 1 / 2 ] – – –
S T L / F . A D V 2 N D
B A C K U P R E C T I M E O F F
L O N G P A U S E T I M E 5 M I N
L O N G P A U S E MO D E F . A D V
I N D E X W R I T E O N
R E P E A T MO D E B L A N K
N E X T P A G E
P A G E B A C K
SYSTEM (1/2) menu
Setting
Ⅵ REPEAT MODE item of the SYSTEM (1/2) menu
OFF :No repeat playback.
INDEX :Repeat playback between positions where index sig-
nals are recorded.
VIDEO END :Repeat playback from the beginning of the tape to
the position where video signal recording ends.
TAPE END :Repeat playback from the beginning to the end of
the tape.
Operation
1.
Press the REW button and rewind the tape to the be-
ginning.
2.
Press the PLAY button to begin replay.
¥ When it reaches the position set at the REPEAT MODE menu
item, the tape rewinds and plays back again.
Ⅵ To abort the repeat playback function, press the STOP
button.
Repeat operation
INDEX repeat playback
• If no index signal is de-
tected during playback,
the tape will run till the
end. If no index signal is
detected during rewind,
the tape will rewind till the
beginning.
• If the interval between in-
dex signals is less than 1
minute, the function may
not work well.
Memo
If there is dust adhered
to the head, repeat play-
back may not work well.