JVC SP-UXJ60 - Manual (Page 17)

14
Changing the RDS Information
You can see RDS information on the display while listening
to an FM station.
On the remote control ONLY:
Press DISPLAY (orange-colored).
• Each time you press the button, the display
changes to show the following information:
• If no PS, PTY, or RT signals are sent by a station
“NO PS,” “NO PTY,” or “NO RT” appears on the display.
• On the characters displayed
When the display shows PS, PTY or RT signals:
– The display shows upper case letters only.
– The display cannot show accented letters; for example, “A”
may represent accented “A’s” like “Б, В, Г, А, Д and Å.”
DISPLAY
PS
(Program Service)
PTY
(Program Type)
RT
(Radio Text)
Station frequency
(or preset channel no.)
Searching for Programs by PTY Codes
(PTY Search)
One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
• For details on the PTY codes, see “Additional Information”
on page 25.
To search for a program using the PTY codes
REMEMBER you must preset FM RDS stations to use the
PTY codes. If not yet done, see page 12.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start over from step 1.
On the remote control ONLY:
1
Press PTY SEARCH.
“PTY” and “SELECT” appear on the display
alternately.
2
Press PTY SELECT + or PTY
SELECT – until the PTY code
you want appears on the
display.
• Each time you press the buttons, the PTY codes
change as follows:
NONE Ô NEWS Ô AFFAIRS Ô INFO Ô
SPORT
Ô EDUCATE Ô DRAMA Ô
CULTURE Ô SCIENCE Ô VARIED Ô
POP M Ô ROCK M Ô EASY M Ô
LIGHT M
Ô CLASSICS Ô OTHER M Ô
WEATHER Ô FINANCE Ô CHILDREN Ô
SOCIAL Ô RELIGION Ô PHONE IN Ô
TRAVEL Ô LEISURE Ô JAZZ Ô
COUNTRY
Ô NATION M Ô OLDIES Ô
FOLK M Ô DOCUMENT Ô TEST Ô
ALARM Ô (back to the beginning)
3
Press PTY SEARCH once again.
While searching, “SEARCH” and the selected PTY
code alternately appear on the display.
The unit searches 30 preset FM stations, stops when it
finds the one you have selected (“FOUND” and the
selected PTY code appear), and tunes in that station.
• If no program is found, “NOTFOUND” appears on
the display and the unit returns to the last received
station.
To stop searching any time during the process, press PTY
SEARCH while searching.
If you preset a station while PTY Search is being
carried out
PTY Search may not stop. If this happens, press PTY SEARCH to
stop searching manually.
PTY
SEARCH
PTY
SELECT
+
–
Continued
EN01-15_UX-J60&50[B]f.pm6 02.12.23, 9:33 AM 14