JVC GD V501U - Manual (Page 33)

33
Setup of SCREENSAVER Time
5
SCREENSAVER
Press to select START TIME/ FINISH TIME
(When TIME OF DAY is selected).
Press to select SHOW DURATION/ SAVER
DURATION (When INTERVAL is selected).
Press to select each time adjustment screen.
START TIME
START TIME 0:00
00
MINUTES ADJUSTMENT 00
HOURS ADJUSTMENT
FINISH TIME
FINISH TIME 0:00
MINUTES ADJUSTMENT
HOURS ADJUSTMENT 00
00
Press to select HOURS ADJUSTMENT/
MINUTES ADJUSTMENT.
Press to set up HOURS or MINUTES.
PERIODIC TIME
SHOW DURATION 0:00
MINUTES ADJUSTMENT
HOURS ADJUSTMENT 00
00
OPERATING TIME
SAVER DURATION 0:00
MINUTES ADJUSTMENT
HOURS ADJUSTMENT 00
00
button: Forward
button: Back
Press to store settings.
Note : Timer function will not work unless “PRESENT TIME OF DAY” is set.
6
0:00
0:00
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
INTERVAL
SHOW DURATION
SIDE BAR ADJUST HIGH
SAVER DURATION
SIDE BAR ADJUST
2 Press to select the
SIDE BAR ADJUST.
Press to select
OFF, DARK, MID, BRIGHT.
OFF DARK MID BRIGHT
R
0:00
0:00
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
INTERVAL
SHOW DURATION
SIDE BAR ADJUST MID
SAVER DURATION
Press to exit from SCREENSAVER.
3
1
Do not display a picture in 4:3 mode for an extended period, as
this can cause an after-image to remain on the side bars on
either side of the display field.
To prevent the appearance of such an after-image, change the
brightness of the side bars.
To display the SCREENSAVER screen.
(Refer to page 32, operation guide steps 1 and 2.)
Notes:
• Setting the side bar to bright mode for an extended period may result in occurrence of after-images.
• The side bar may flash (alternate black/white) depending on the picture being shown on the screen. In such
an occurrence, use the Cinema mode.
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
TIME OF DAY
START TIME 0:00
0:00
SIDE BAR ADJUST MID
FINISH TIME
side bars
4:3
Screen Display
after-images