JVC KD-G700 - Manual (Page 23)

23
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
For KD-AR800/KD-G800:
For KD-G700:
Indication To do: Range
FAD * 1 Adjust the front R06 (Rear only)
and rear speaker |
balance.
F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance.
R06 (Right only)
LOUD Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
WOOFER * 2 Adjust the 00 (min.)
(only for subwoofer |
KD-AR800/ output level. 08 (max.)
KD-G800)
VOL * 3 Adjust the 00 (min.)
volume. |
30 or 50 (max.)
* 4
* 1 If you are using a two-speaker system, set the fader
level to “00.”
* 2 This takes effect only when a subwoofer is
connected.
* 3 Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
* 4 Depending on the amplifier gain control setting.
(See page 30 for details.)
2
Adjust the setting.
3
Repeat steps 1 and 2 to adjust the
other items.
To increase the level or
turn on the loudness
To decrease the level or
turn off the loudness
LOUD ON
|
LOUD OFF
VOL
(volume)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
WOOFER
(subwoofer)
VOL
(volume)
FAD
(fader)
BAL
(balance)
LOUD
(loudness)
Ex. 1: When you adjust “FAD” (fader)
Ex. 2: When you turn on the loudness
Indication pattern changes as
you adjust the fader or balance.
LOUD indicator