JVC KD-S717 - Manual (Page 7)

7
ENGLISH
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (AM, FM1 – 3).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢ or 4
until “M”(manual) starts flashing on
the display.
Press ¢ to search
stations of higher frequencies.
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band (AM, FM1 – 3).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
FM1
AM
FM2 FM3
Selected band appears.
FM1
AM
FM2 FM3
Press 4 to search
stations of lower frequencies.
Audio (see page 17) or volume level indicator
Selected band (or clock time: see page 17)
appears.
FM1 and FM2: 87.5 MHz – 108 MHz
FM3: 65 MHz – 74 MHz
RADIO BASIC OPERATIONS
CONTINUED ON THE NEXT PAGE
EN07-09.KD-S717[EE]2 00.12.12, 10:38 AM 7