JVC TS-C50P6G - Manual (Page 5)

English
12
5. Installing the display to the wall-hanging bracket
Installation procedure
Fit the insulating spacers on the
upper part of the display into the
notches at the top of the wall-
hanging bracket.
While lifting the display up slightly,
insert the insulating spacers on the
lower part of the display into the
notches in the lower part of the
wall-hanging bracket.
Lower the display into place.
6. Securing the display
• Tighten the accessory fixing screws
into the fixing screw flanges at the
left and right sides of the wall-
hanging bracket.
Fixing screws
Insulating spacer
Insulating spacer
• Do not lift the display too high, otherwise it may become unhooked.
N o t e
Note
• Be sure to tighten the left and right fixing screws to prevent the display from detaching from the wall-hanging bracket.
N o t e
Note
Wall-hanging bracket
Fixing screws (left and right)
Fixing screw mounts
Installation procedure