Jelly Belly Slushi Express - Manual (Page 4)

4
U
SING
Y
OUR
S
LUSHIE
E
XPRESS
™
The slushie cup has convenient measuring marks to create perfect slushies and
frozen drinks. To make your favorite slushie, follow the steps below.
1. Add ingredients to the slushie cup using the markings on the back of the cup as
a measuring guide:
a. Add Jelly Belly
™
premium flavored syrup up to the “Syrup” line.
b. Add water up to the “Liquid” line.
c. Add ice until the liquid mixture reaches the “Ice” line. Gently press
ice down to make liquid rise to “Ice” line if necessary. Do not add
too much ice.
2. Place the blade base on the slushie cup and turn clockwise until tight. If lid will
not go on properly due to too much ice, remove some ice before proceeding.
3. Flip the slushie cup with blade base attached over (cup will be upside down).
Position the blade base onto the motor base by aligning the small tabs on the
blade base with the matching openings on the motor base top.
4. Holding the cup bottom, press cup down and turn clockwise to lock in and run
the motor.
5. Run motor until ice is finely crushed, mixture appears “slushie” and the top of
the slushie mixture forms a funnel shape. Mix time is about 15 – 20 seconds.
6. If ice gets jammed in the blades at the beginning of processing and prevents the
blades from spinning, turn cup counter-clockwise to disengage motor and stop
machine. Gently shake the cup to dislodge ice and repeat steps 4 and 5.
Note: Jammed ice is most often caused by using large ice cubes frozen in ice
trays. Ice from a refrigerator/freezer ice maker, smaller cube trays, larger trays
filled only half full or purchased bagged ice works best.
7. When slushie is done, turn cup counter-clockwise to stop the machine and
unlock from the base.
8. Remove slushie cup from motor base and turn right side up.
9. Turn blade base counter-clockwise and remove from slushie cup.
10. Attach slushie cup lid by placing over the top of the slushie cup and turning
clockwise.
11. Use the spoon/straw to eat and drink your frozen slushie treat.
Flavor Strength - To increase the flavor, add more syrup and less water. To
decrease the flavor, add less syrup and more water. Note: Be sure to keep the total
liquid ingredients no higher than the “Liquid” marking and ice no higher than the “Ice”
marking on the slushie cup.
• A small amount of smoke and/or odor may occur upon use due to the
release of manufacturing oils – this is normal.
• Some minor expansion/contraction sounds may occur during use – this is
normal.
C
LEANING
Y
OUR
S
LUSHIE
E
XPRESS
™
Always unplug appliance before cleaning.
Before using the first time and after each use, be sure to thoroughly wash the blade
base, slushie cup, lid and spoon/straw in warm, soapy water. Rinse and dry
thoroughly. Do not wash any parts in dishwasher.
DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
WIPE CLEAN AFTER EACH USE WITH A DAMP CLOTH.