Bellavista, Technical specifications, End view side view – Jacuzzi Bellavista BT65 User Manual
Page 2: Lw h
Bellavista
™
6
Whirlpool Bath
technical Specifications
DimenSionS
72” L x 42” W x 26” H
(1829 mm) L x (1067 mm) W x (660 mm) H
Drain/overfloW
A: 20” (508 mm) B: 11-3/4” (298 mm)
Cutout
Template Provided P/N P187000
total Weight
EE20: 1130 lb (514 kg) / 54 lb/sq. ft. (264 kg/m
2
)
Y870: 1200 lb (544 kg) / 57 lb/sq. ft. 279 kg/m
2
)
operating gallonage
87 U.S. Gal. (341 Liters)
Min. 75 U.S. Gal. (276 Liters)
Max. 98 U.S. Gal. (371 Liters)
proDuCt Weight
EE20: 130 lb (59 kg)
Y870: 100 lb (33 kg)
Skirt mounting
Not Available
eleCtriCal SpeCifiCationS
— model ee20 only
requires a dedicated gfCi protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
heater (StanDarD) — model ee20 only
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR23000 10/07
ee20
Bellavista™ 6 Whirlpool Bath with RapidHeat™ Right Hand
Bt65
Bellavista™ 6 Whirlpool Bath with RapidHeat™ Left Hand
Y870
Bellavista™ 6 Bath
• Center Drain
• Accessories / Hardware:
HTA Jet Rings Kit: #M952
BMH Jet Trim Kit: #J869
2 x Neck Jet Rings Trim Kit: #P556
Oval Trim Kit: #N557
Rotary Drain Kit, 30” Cable: #K606
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Bellavista
™
6
Soaker Bath
4" x 4"*
42"
72"
10-1/2"
35-13/16"
11-3/4"
6"
30-1/8"
END VIEW
SIDE VIEW
2"
L
W
H
(Heater)
(Motor)
(51 mm)
MAX. 1/2"**
DRAIN/OVERFLOW
A
B
product Shown: Bellavista™ 6 Whirlpool Bath
right hand Shown, model: ee20
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.