C connecting to a tv with component jacks, Progressive scan video playback available, About the scanning mode – JVC XV-N318S User Manual

Page 7: Video signal selector

Advertising
background image

5

XV-N318S/GNT0042-001A/English

P

re

p

a

ra

ti

o

n

s

C Connecting to a TV with component jacks

You can enjoy picture of high-fidelity color reproduction by
connecting the COMPONENT VIDEO OUT jacks on the player to
your TV.

NOTES

• Connect “Y” to “Y,” “P

B

” to “P

B

” (C

B

), “P

R

” to “P

R

” (C

R

) correctly.

• When using the COMPONENT VIDEO OUT jacks, do not

connect the S-VIDEO output jack on the player.

• If your TV has component video input jacks of BNC type, use an

adapter which converts a pin jack to a BNC jack (not supplied).

Selecting the VIDEO SIGNAL SELECTOR position
• If your television accommodates the PAL color system format

and does not support the progressive scanning mode:
Set the VIDEO SIGNAL SELECTOR to “PAL 625i.”

• If your television accommodates the NTSC color system format

and does not support the progressive scanning mode:
Set the VIDEO SIGNAL SELECTOR to “NTSC 525i.”

• If your television accommodates the NTSC color system format

and supports the progressive scanning mode:
Set the VIDEO SIGNAL SELECTOR to “NTSC 525i/p
REMOTE.”
Thus you can select the desired scanning mode using the
remote control unit.

Activating the Progressive scanning mode using the remote
control unit
When the player is turned on and the VIDEO SIGNAL
SELECTOR is set to “NTSC 525i/p REMOTE,” press and hold
down VFP - PROGRESSIVE SCAN for a few seconds.
The scanning mode switches between the Progressive scanning
and Interlaced scanning modes.

When the scanning mode is set to the Progressive mode, the [P]
indicator lights up in the display window.
Depending on the [PICTURE SOURCE] preference display and
whether the current DVD VIDEO disc is film-source or video-
source, the indicator that lights up in the display window differs,
as shown in the table below.

NOTES

• The Progressive scanning mode works only when you connect

the player’s COMPONENT VIDEO OUT jacks to your TV.

• There are some progressive TV and High-Definition TV sets

that are not fully compatible with the player, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.

• All JVC progressive TV and High-Definition TV sets are fully

compatible with the player (Example: AV-61S902).

• The VIDEO jack, S-VIDEO jack and COMPONENT VIDEO

OUT jacks cannot be used at the same time. Connect cable(s)
only to the jack(s) you want to use.

Progressive scan video playback available

In the Progressive scanning mode, you can enjoy high quality
picture with less flickers when the COMPONENT VIDEO OUT
jacks are connected to a TV or monitor that supports the
progressive video input.
• The Progressive scanning mode works for the NTSC color

system format only.

About the scanning mode

Depending on the material source format, DVD VIDEO discs
can be classified into two types; film source and video source
(note that some DVD VIDEO discs contain both film source
and video source). Film sources are recorded as 24-frame-per-
second information, while (NTSC) video sources are recorded
as 30-frame-per-second (60-field-per-second interlaced)
information.
When the player plays back a film source material,
uninterlaced progressive output signals are created using the
original information. When a video source material is played
back, the player interleaves lines between the interlaced lines
on each to create the interpolated picture and outputs as the
progressive signal.

RIG

HT

LEFT

AUD

IO

VIDEO

S-VIDEO

IN

P

R

P

B

Y

COMPONENT

VID

EO

RIGHT

LEFT

COAX

IAL

PCM/

STR

EAM

DIGIT

AL OU

T

AUDI

O OUT

VIDEO

S-VID

EO

P

R

P

B

Y

VIDEO

OUT

COM

PONEN

T

VIDE

O SIG

NAL

SELEC

TOR

AV

COM

PU L

INK

PA

L 625i

NTS

C 525i

NTSC

525i

/p REM

OTE

PAL 625i

NTSC 525i

NTSC
525i/p REMOTE

VIDEO SIGNAL

SELECTOR

The player

Blue

Green

Red

White

Red

Red

White

Audio cable (not supplied)

Component video cable (not supplied)

Green

Blue

Red

TV

Setting of [PICTURE
SOURCE]

Source type of DVD VIDEO

Film source

Video source

AUTO

[DDP]

[P]

FILM

[DDP]

[DDP]

VIDEO (NORMAL)/
(ACTIVE)

[P]

[P]

XV-N318S(USUBUGUX).book Page 5 Friday, May 7, 2004 12:19 PM

Advertising
This manual is related to the following products: