JVC XV-S42SL - Manual (Page 22)

Basic operations
20
Ba
si
c op
er
a
tio
ns
7 During playback
Press 4 or ¢.
Press 4 to locate the beginning of the current chapter, title, or track, and press ¢ to locate the beginning of the
next chapter, title, or track.
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.
1 Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON”.
(See page 43 for details about how to set.)
2 At the position you want to interrupt playback, press 7, or press STANDBY/ON on the remote
control or on the front panel.
The unit memorizes the interrupted position.
• If you interrupt playback by pressing 7 in step 2 above and then turn off the power, the memory is not cleared.
7 While the disc you interrupt playback last time is still in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press
7 while stopped.
*Turn on the unit by pressing STANDBY/ON (on the remote control) or (on the front panel).
To locate the beginning of the scene or song
NOTE
• When you play a Video CD/SVCD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it
will generally locate the beginning of the title, chapter or track.
To memorize the interrupted position
To resume playback
NOTES
• The resume function does not work with Audio CD and MP3 CD discs.
• The resume function does not work if “ RESUME” on the “ SYSTEM” page of the preference display is set to “ OFF”.
• In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier than the
resume point you stored.
• The resume function does not work in the program or random mode.
6(1*ERRN 3DJH  :HGQHVGD\ $SULO     30