Recording features, Select preset to watch, Start recording – JVC HR-J435EK User Manual

Page 23: Engage itr mode, Set recording duration, Set counter display, Reset counter, Record one programme while watching another, Instant timer recording (itr), Elapsed recording time indication

Advertising
background image

23

Record One Programme

While Watching Another

SELECT PRESET TO WATCH

1

Once recording is in progress, all you need to do is to
set the preset controls on the TV for the station you
wish to view.
● The programme selected with the TV’s preset controls

appears on the TV screen while the one selected with
the TV PROG. or PUSH JOG

%fi buttons is recorded

on the tape.

1

2

4

5

3

6

8

0

7

9

1

3

2

6

q

TV PROG.

PUSH JOG

DISPLAY

C.RESET

TV PROG.

Recording

Features

COUNTER RESET

RECORD

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.

START RECORDING

1

Press RECORD on the recorder.

ENGAGE ITR MODE

2

Press RECORD again. ITR blinks and 0:30 appears on
the front display panel.

SET RECORDING

DURATION

3

If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the
recorder's front panel.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

SET COUNTER DISPLAY

1

Press DISPLAY until a counter reading appears on the
dispay panel.

RESET COUNTER

2

Press COUNTER RESET before starting recording or
playback.

● The counter is reset to “0:00:00” and shows the exact

elapsed time as the tape runs.

Advertising