JVC DM-NC40 - Manual (Page 28)

28
4-2 Time Setup
(Be sure to perform)
Step 4 Initial Settings
(Continued)
Set the time and date of the unit. Be sure to perform these settings since they are used as file
names of JPEG recorded to the CF card.
1.
Click “Time Setup” on the left of the Network Codec screen
• The TIME SETUP screen will be displayed.
1 Select the country/region of use.
4 Current time and date can be
confir med by pressing the
“RELOAD” button.
3 Press the “SET” button to
register the entered values.
Memo
The “Second” is for display only
and cannot be entered or
changed.
2 Enter the year, month, date, hour
and minute.
Memo
When changing the Timezone,
be sure to set Date&Time Setup
with the correct values as well.