JBL Professional EON10 G2 - Manual (Page 6)

Applications
• Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional
venues-especially when ease of use and portability are important factors.
• Amplification, mixing, and monitoring for electronic musical instruments.
Features
The second generation of one of the most successful and influential professional speaker systems ever.
• 10” Differential Drive
® low-frequency driver with a neodymium magnet for low-distortion and light weight.
• 1” (throat diameter) JBL compression driver with titanium diaphragm and ferro-fluid cooling.
• Bi-amplified 125 watts low frequency and 50 watts high frequency - actual power delivered to the drivers.
• Built-in 3-input mixer. One balanced mic / line selectable input, one dual-channel TRS 1/4” phone line-level
• Balanced loop-through / mix output. “Daisy-chain” additional EON speakers or send the mixed output to a
mixing console or auxiliary EON speaker.
• 90° x 60° (nominal) constant directivity horn.
• Thermomaster
® Total Thermal Management System ® . A single piece, cast-aluminum baffle integrates the
woofer frame, horn, and amplifier heat sink. Air movement in the finned ports dissipates heat - no internal
or external cooling fans are required.
• Rugged, lightweight, black co-polymer enclosure with an ergonomic molded in handle and cast
aluminum baffle.
• Integral 35 mm pole mount receptacle with securing thumbscrew.
• Multi-angle enclosure for front of house or stage monitor application.
Specifications
Freq. Range (-10 dB): 65 Hz - 18 kHz
Freq. Response (±3 dB): 90 Hz - 16 kHz
Horiz. Coverage (-6 dB): 90° nominal
Vert. Coverage (-6 dB): 60° nominal
Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 493 mm x 356 mm x 307 mm (19.4 in x 14.0 in x 12.1 in.)
Net Weight: 10.4 kg (23 lbs.)
LF Driver: Integral frame with one 10” (254 mm) driver, dual neodymium magnet,
1.5” Differential-Drive
® voice-coil.
HF Driver: JBL2412 1” (throat diameter) compression driver with titanium diaphragm.
Ferro-fluid cooled.
Amplifier Power LF: 125 watts @ low-frequency driver impedance.
Amplifier Power HF: 50 watts @ high-frequency driver impedance.
Input 1 Sensitivity: -48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position)
-6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
Output Level: +26 dBu (peak), Loop/Mix switch in MIX position
Audio Connectors Input 1: XLR/F, balanced
Audio Connectors Input 2 & 3: Single TRS 1/4” Phone
Crossover Freq: 2.7 kHz
Loop/Mix Out: XLR/M, balanced.
AC Input: 110 - 230 VAC, 50 - 60 Hz, 100 watts rating per UL, detachable IEC
power cable
6
About The EON10 G2