Jwin JX-43000D - Manual (Page 10)

9
PROGRAMMED PLAY
Up to 20 tracks on a disc can be programmed for
play in any order.
-
To begin the programming procedure, select
CD function first.
- The same track can be programmed more
than once.
- Load a disc that you want to programme be-
fore starting programmed play.
1. Press the button if necessary.
2. Press the MEMORY button
3. Select a track by using the
and
buttons.
4. Press the MEMORY button.
5. Repeat steps 3 - 4 to programme additional
tracks.
6. Press the button to start play. When
all programmed tracks have been played,
the player stops automatically.
-
The programme contents are retained in
memory.
- To cancel programmed play, press the
but
Checking the programme
Press the MEMORY button twice in the stop
mode, the programmed tracks sequentially
appear on the display.
Changing the programme
To add a new selection to a programme:
1. In the stop mode, press the MEMORY
button.
2. Select the track number as explained above.
3. Press the MEMORY button.
WHAT TO DO IF...
If an abnormal display indication or an operating
problem occurs, dcisconnect the mains lead and
remove all batteries. Wait at least 5 seconds, then
reconnect the mains lead and reinstall the
batteries. Resume the operation.
ton twice.
- Do not expose the disc to direct sunlight,
high humidity or high temperatures for ex-
tended periods of time.
- Discs should be returned to their cases after
use.
- Do not apply paper or write anything on the
disc surface.
- Handle the disc by its edge. Do not touch the
playing surface (glossy side).
- Fingerprints and dust should be carefully
wiped off the playing surface of the disc with
a soft cloth.
Wipe in a straight motion from the centre to
the outside of the disc.
- Never use chemicals such as record clean-
ing sprays, antistatic sprays or fluids, ben-
zene or thinner to clean compact dises.
Temporarily stopping play
Press the
button. The CD PLAY indicator
blinks.To resume play, press the button again.
Skip play
To skip to track 6 while track 3 is playing,press the
button repeatedly until 6 appears on
the display. To skip back to track 3 while track 6 is
playing, press the
button repeatedly until
3 appears.
Search(forward/reverse)
If the
or button is pressed
during play, the player will search at high speed in
the forward or reverse direction while the button is
being pressed. When the button is released
normal play will continue.
Repeat play
Press the REPEAT button before or during play.
Each time the button is pressed,the repeat mode
changes.
Notes on handling compact discs