Determining glass enclosure dimensions – Jacuzzi Neo Angle Shower System User Manual
Page 6
Jacuzzi Whirlpool Bath National Headquarters
P.O. Drawer J, Walnut Creek, CA 94596 (925) 938-7070
Service Support:
Call (800) 288-4002
Jacuzzi Whirlpool Bath Regional Offices
©1997
Jacuzzi Whirlpool Bath M903000 B 12/02
Printed on Recycled Paper
Printed in U.S.A
.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.
Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of
this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product.
Jacuzzi Whirlpool Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.
Determining Glass Enclosure Dimensions
MODEL
A
B
C*
4242N
20-3/4"
27-3/8"
1-3/8"
4848N
26-3/4"
27-1/2"
1-3/8"
ROUGH-IN DIMENSION CHART
*
C
represents the dimension from the stud wall to the
face of the finishing materials used in the shower con-
struction.
If Jacuzzi Whirlpool Bath surround walls are used,
subtract 1-3/8" from dimension
A
to arrive at glass enclo-
sure dimensions. If other materials are used, subtract
their thickness from dimension
A
.
C*
A
A
C*
B
C OF THRESHOLD
L