JVC HR-XVC34U - Manual (Page 33)

Masterpage:Right-No-Heading
EN
33
Filename [XVC34U_07S-VHS.fm]
Page 33 20 February 2004 5:18 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Choose a program.
Press CH +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press SP/EP. The current setting appears on the front
display panel or TV screen. Press SP/EP again to change
the setting while the tape speed is displayed on the TV
screen.
E
Start recording.
Press and hold REC (7) and press PLAY (4) on the
Remote, or press REC (7) on the unit.
F
Pause/Resume recording.
Press PAUSE (9). Press PLAY (4) to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press STOP (8). Then press EJECT (x) on the VCR deck
to remove the cassette.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
੬
pg. 33, 34, 36), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
XVC34U_01.book Page 33 Friday, February 20, 2004 5:58 PM