Manual dubbing (from dvd to vcr), Dubbing a part of a disc, M “manual dubbing (from dvd to vcr) – JVC SR MV45U User Manual
Page 49: Pg. 49)
Masterpage:Right+
EN
49
Filename [SR-MV45_55U_10Editing.fm]
Page 49
January 10, 2007 1:18 pm
EDITING
Dubbing A Part Of A Disc
You can dub the selected scenes on a DVD disc to the tape,
starting and stopping wherever you wish.
1
Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
2
Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
3
Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
8, 9
4
Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
(
C Press 7 and 9 simultaneously so that the VCR deck enters the
Record Pause mode.
5
Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
6
Press 8 to stop recording on the VCR deck. Then press VCR/
DVD, and press 8 to stop playback on the DVD deck.
● Press VCR}DVD to turn off the dubbing (DUBB.) lamp.
NOTES:
● It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
● If you do not want the superimposed indication to be recorded, set
“SUPERIMPOSE” to “OFF” before dubbing. (
● When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
● When the progressive mode is set, the dubbing (DUBB.) lamp does
not light up on the front display panel. Press PROGRESSIVE SCAN
so that video output indicator (
) lights off on the front display panel.
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
Manual Dubbing (From DVD To VCR)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
8
5
3
4
7
9
REC MODE
PROGRESSIVE SCAN
VCR/DVD
8
VCR } DVD
DUBB.
7
3
VCR/DVD
REC
MODE
U
5 9
DUBB. Lamp
SR-MV45_55US.book Page 49 Wednesday, January 10, 2007 1:18 PM