JVC SR MV45U - Manual (Page 50)

Filename [SR-MV45_55U_10Editing.fm]
Masterpage:Left+
50
EN
Page 50 January 10, 2007 1:18 pm
EDITING
Dubbing The Desired Programs On A Disc
You can select and dub your desired programs on a DVD disc to
the tape.
1
Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
2
Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
3
Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Press NAVIGATION to access the Library Database DVD Navi
screen.
C Press rt w e to select “ORIGINAL”, then press ENTER.
D Press w e to select the desired program, then press MEMO.
● Select the programs in the order that you want them to be dub. The
numbers of the playback order appear on the index. You can select
up to 30 programs.
● If you have specified a wrong selection, press MEMO. The number
disappears.
● When you want to clear all the numbers, press CLEAR (8).
4
Press 4 to locate the point where you want dubbing to start,
then press 9 to pause playback.
5
Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
(
੬ pg. 36)
C Press 7 and 9 simultaneously so that the VCR deck enters the
Record Pause mode.
6
Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
● Playback on the DVD deck and recording on the VCR deck starts at
the same time.
● When all the selected programs have been dubbed, playback on the
DVD deck and recording on the VCR deck stops automatically at the
same time. P
ress VCR}DVD to turn off the dubbing (DUBB.)
lamp.
NOTES:
● The program memory remains even after dubbing is completed. To
clear the memory, access the Library Database DVD Navi screen and
press CLEAR (8).
● When locating the point where you want dubbing to start, be sure to
press 4 then press 9. There should be at least a one-second
interval when pressing these two buttons.
● If you do not want the superimposed indication to be recorded, set
“SUPERIMPOSE” to “OFF” before dubbing. ( ੬ pg. 59)
Program Dubbing (From DVD to VCR)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
4
7
9
REC MODE
ENTER rtw e
NAVIGATION
MEMO
VCR/DVD
CLEAR (8)
VCR } DVD DUBB.
7
VCR/DVD
REC
MODE
U 9 DUBB. Lamp
SR-MV45_55US.book Page 50 Wednesday, January 10, 2007 1:18 PM