JVC SR MV45U - Manual (Page 62)

Filename [SR-MV45_55U_11Subsidiary.fm]
Masterpage:Left+
62
EN
Page 62 January 10, 2007 1:18 pm
SUBSIDIARY SETTINGS
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
Format A DVD-RAM Disc
1
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press rt w e to select “DVD SET UP”, then press ENTER.
4
Press w e to select “UTILITY”,
then press ENTER.
5
Press rt to select “FORMAT”,
then press ENTER. Press w e to
select “YES”, then press ENTER
when “DISC WILL BE
FORMATTED” appears on the TV
screen.
6
Press w e to select “OK”, then
press ENTER when “DISC FORMATTING WAS SELECTED”
appears on the TV screen.
7
Upon completing formatting, “COMPLETED” appears on the TV
screen. Press ENTER to end, then press SET UP to return to the
normal screen.
Format A DVD-RW Disc
1
Perform steps 2 to 4 of “Format A DVD-RAM Disc” on the above
before continuing.
2
Press rt to select “FORMAT”, then press ENTER. Press w e
to choose “VR MODE” or “VIDEO MODE”, then press ENTER
when “DISC WILL BE FORMATTED” appears on the TV screen.
“VR MODE”:
To be chosen when you want to record, erase, or
edit data on the disc repeatedly.
“VIDEO MODE”: To be chosen when you want to erase all the data
on the disc once played back to record new data,
or play back the disc on other DVD players.
3
Press w e to select “YES”, then press ENTER when “DISC
WILL BE FORMATTED IN VR MODE/VIDEO MODE” appears on
the TV screen.
4
Upon completing formatting, “COMPLETED” appears on the TV
screen. Press ENTER to end, then press SET UP to return to the
normal screen.
NOTES:
● It is impossible to format Version 1.0 DVD-RW discs in Video mode.
● It is impossible to format DVD-R discs.
● All the programs on a disc will be deleted once the disc is formatted
even if they are protected titles. (
੬ pg. 41)
Format A Disc (DVD Deck Only)
ATTENTION:
● When a disc is formatted, all recordings and data are erased. It is
impossible to restore them.
● Never turn off the unit or disconnect the mains power cord while
“NOW FORMATTING...” is displayed on the TV screen.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Load a DVD-RAM/RW disc to format.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw e
VCR/DVD
SR-MV45_55US.book Page 62 Wednesday, January 10, 2007 1:18 PM