JayBird JB-BA-100I - Manual (Page 4)

ENGLISH
The JayBird JB-BA-100i Bluetooth ® Adapter for iPod ® is powered by the iPod ®
once connected to the iPod ® dock connector, so no batteries are required.
Pairing the adapter with your JayBird
Bluetooth ® Stereo Headset
1. Before pairing, make sure that your headset is turned off (no flashing blue
LED through the right side logo).
2. Put the headset into pairing mode by pressing the POWER/TALK button
on the headset for 5 seconds until the LED on the right earpiece begins
blinking alternating red and blue colors.
3. Plug the adapter into the iPod ® dock connector located on the base of
your iPod ® . The LED and JayBird name should be facing UP (same side
as the front of the iPod ® )
4. Turn the iPod ® on and start playing music. The adapter will activate and
respond to the streaming music by automatically searching for the JayBird
JB-100 Bluetooth ® Stereo Headset. The LED on the adapter will be steady
blue color while it is in search mode, and then flash blue once it start to
pair with the headset.
5. Once the headset finds and pairs with the adapter, both the adapter and
headset LEDs will blink blue (the headset will blink blue every six seconds
and the adapter LED will blink blue every 2 seconds). Your headset and
adapter are now paired.
Listening to Music
1. Once paired, the next time you connect the devices, just turn your headset
on by holding the power/talk button for 3 seconds until the LED on the right
earpiece flashes blue, then plug the adapter to the iPod ® dock connector
and play music. You will hear the music through your headset.
2. Adjust the volume by using the UP/DOWN buttons on the headset.
Adjusting the volume on the iPod ® will have no effect.
3. When not using the adapter, it’s a good idea to remove it from the iPod ®
dock connector as it is drawing power from the iPod® and will reduce
the iPod ® battery play time.
Using the phone call feature of your JayBird
Bluetooth ® Stereo Headset
1. The JayBird Bluetooth ® Stereo Headset can also be paired with any
compatible Bluetooth ® enabled mobile phone. For pairing instructions,
refer to the user manual that came with your headset.
For a list of compatible A2DP enabled phones please visit www.jaybirdgear.com/phones
3