JVC KS-LH60R - Manual (Page 2)

2
ENGLISH
How to reset your unit
After detaching the control panel, press the reset button on the panel holder using a ball-point pen
or a similar tool.
This will reset the built-in microcomputer.
Note:
Your preset adjustments—such as preset channels or sound adjustments—will also be erased.
How to use the M (MODE) button
If you press M (MODE), the unit goes into functions mode (“MODE” flashes on the upper part of the
display). While in functions mode, the number buttons work as different function buttons.
• When connecting a JVC MP3-compatible CD changer: The
5/∞ buttons will also work as
+10/–10 buttons after pressing M (MODE).
Ex.: When number button 2 works as MO (monaural) button.
To use these buttons for original functions again after pressing M (MODE), wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared (“MODE” disappears from
the display).
• Pressing M (MODE) again also clears the functions mode.
Time countdown
indicator MO (monaural)
indicator lights up.
EN02-04KS-LH60R[E_EX]f.p65 3/7/03, 7:08 PM 2