Jwin JX-CD280 - Manual (Page 4)

3
THE HOLD FUNCTION
It is useful during playing, the function will lock the key on the panel to protect the
mistake in the Playing.
During playing slide the HOLD switch to “ON” position, the “HOLD” will appear in the
display, the key on the panel will be locked, the panel key is disabled.
Slide the HOLD Switch to “OFF” position to stop the function.
LISTENING WITH HEADPHONES
Connect the plug of the stereo headphone into the headphone jack (marked
phones) before use the unit.
CAUTION: Hearing experts advise against exposure to continuous extended play at
loud volume levels while using headphones, possible hearing loss may result. If you
experience a ringing in the ears, reduce volume or discontinue use. We want you
listening for a life time.
PLAYING A DISC
Be sure to reduce the volume before plugging in or unplugging the headphones/
earphones
1. Plug the cord from a pair of headphone/earphone into the PHONES jack.
2. Slide the Door Open button to open the CD door.
3. Hold the disc with the label side up and press it onto the spindle until it “clicks”
into place.
4. Close the disc compartment, press PLAY/PAUSE button, the disc will begin to spin,
the display will indicate “01”, play will begin immediately from track number 1.
5. Adjust the volume as desired.
6. Set the BASS BOOST function as desired.
7. To stop play temporarily, press the PLAY/PAUSE button.
• The elapsed playing time flashes in the display.
• Press the PLAY/PAUSE button again to resume.
8. To stop play, press the Stop Button, and the power turns off automatically after a
while.
Note: Both 8cm and 12cm discs can be played in the unit.
Place only one disc at a time in the CD compartment.
TRACK SEARCH
• Press the and button during play to skip to the desired track.
• Press the to skip to the next track on the disc.
• Press the to skip to the beginning of the track currently playing.
• Press the twice or more to skip to previous tracks.
FORWARD/REVERSE SEARCH
Press and hold the skip ( ) button during play to scan the disc at high speed.
When the desired section of the disc is found, release the button. Normal play will resume.
----forward ----reverse
• If you press and hold the skip button ( ) while playing, it will scan the current
playing track forward at high speed.
• If you press and hold the skip button ( ) while playing, it will scan the current
playing track backwards at high speed.