Connections, When connected to a vcr equipped with a jlip jack – JVC MultiMediaNavigator User Manual
Page 7
EN
7
CONNECTIONS
WHEN CONNECTED TO A VCR EQUIPPED WITH A JLIP JACK
When JLIP Video Producer is used:
When JLIP Video Capture is used:
To PC jack
To S OUT
jack
S-VIDEO cable
(provided)
AUDIO/VIDEO cable
(provided)
To S-VIDEO
input jack
To JLIP jack
JLIP cable
(provided)
Core filter
To JLIP jack
PC connection cable
(provided)
PC
To COM port
(RS-232C)
Connect this if the video unit has
an S-Video input jack.
Video Camera
VCR
(Recording deck)
White to
AUDIO L
Red to
AUDIO R
Yellow to
VIDEO
If your VCR has a SCART
connector, use the cable
adapter (PAL only).
Core filter
White to
AUDIO L
Red to
AUDIO R
Yellow to VIDEO
Ⅲ To assure safety, make sure all units are turned off before making any connections.
Ⅲ We recommend that you use the AC Power Adapter/Charger.
Ⅲ When connecting the provided cables, be sure to plug the connectors equipped with core
filters into the video camera.
Ⅲ Do not make any connections to the video camera’s DV OUT connector.
Core filter
Core filter