Jura Capresso IMPRESSA X7 - Manual (Page 10)

10
14.8 Programming machine on
Programming the clock is necessary if the function “Machine on”
is used.
Ⅲ
: UNIT
ON —:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
or you can set the hours.
Ⅲ To store, press the key PROG.
Ⅲ By pressing the keys
or you can set the minutes.
Ⅲ To store, press the key PROG.
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
The display —:— means that the function is switched off
14.9 Programming machine off
Ⅲ : UNIT OFF
5.0 HRS.
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
or you can set the hours (switched
off or 0.5 hrs. – 9 hrs.).
Ⅲ To store, press the key PROG.
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
14.10 Draw-offs
Ⅲ : AUDIT TRAIL (total audit trail)
Ⅲ Press the required draw-off key to inquire the draw-offs.
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
Draw-offs of steam cannot be inquired.
14.11 Programming language
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
or you can select the required
language.
Ⅲ To store, press the key PROG.
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
15. Care and maintenance
15.1 Fill water
Ⅲ : FILL WATER TANK
Ⅲ When this display lights up, no more drawing-off is possible. Fill
with water as described under Section 3.3.
The water tank should be rinsed out every day and filled
with fresh water.
If you use an automatic filling device, we recommend that
you rinse the water tank out regularly and fill it up with fresh
water.
15.2 Installation of an automatic filling device
Please read the operating instructions of the automatic filling
device.
+
- +
+
+
- +
+
- +
- +
15.3 Empty grounds container
The grounds container collects the coffee grounds.
Ⅲ
: EMPTY DRAWER
Ⅲ When this display lights up, no more draw-offs are possible and
the grounds container must be emptied.
Ⅲ Carefully remove the drip tray – there is water in it. Then re-
move the grounds container (Fig. 4).
15.4 Empty drip tray
Ⅲ : EMPTY DRIP TRAY
Ⅲ When this display lights up, no more draw-offs are possible and
the drip tray must be emptied.
Ⅲ Carefully remove the drip tray – there is water in it (Fig. 4).
15.5 Grounds container missing
Ⅲ : DRAWER MISSING
Ⅲ When this display lights up, the grounds container has not been
inserted properly or is missing.
15.6 Drip tray missing
Ⅲ : DRIP TRAY MISSING
Ⅲ When this display lights up, the drip tray has not been inserted
properly.
15.7 Fill beans
Ⅲ : FILL COFFEE BEANS
Ⅲ Fill with beans as described in Chapter 3.4.
The display FILL COFFEE BEANS goes off after a draw-off
of coffee.
We recommend that you clean the bean container out with a
dry cloth from time to time before filling. For this, switch the
machine off.
15.8 Removing foreign objects
Ⅲ Switch your machine off with the ON/OFF operating switch.
Ⅲ Remove the plug from the power socket.
Ⅲ Open the hinged door on the reverse of the machine (Fig. 5).
Ⅲ Press the slides downwards (Fig. 6) and remove the bean con-
tainer.
Ⅲ Remove any beans with a vacuum cleaner.
Ⅲ Position the spanner (Fig. 7).
Ⅲ Turn the spanner in an anti-clockwise direction until the foreign
object becomes loose.
Ⅲ Remove remaining powder with a vacuum cleaner.
Ⅲ Now replace the bean container and pull the slides to the front
before closing the door. (Fig. 6).
15.9 Clean machine
Ⅲ : CLEANING NECESSARY
After 220 draw-offs or 180 rinsings, the machine has to be cleaned.
You can continue to draw off coffee and hot water/steam. We re-
commend that you clean the machine (Chapter 18) within the next
few days.
Carry out a combined cleaning (Chapter 18).