JVC XV-NA70BK - Manual (Page 12)

10
XV-NA70BK/XV-NA77SL/GNT0036-001B/English
B
as
ic
op
er
at
io
ns
Basic operations
NOTE
Turning on/off the unit
Press DVD STANDBY/ON on the remote
control unit or press on the front panel.
The STANDBY/ON indicator on the front panel, which lights
in red during standby, lights in green.
The opening display appears on the TV screen, and the following
messages may appear at the bottom of the opening display.
• NOW READING (The unit is reading the disc information.)
• REGION CODE ERROR! (The region code of the DVD VIDEO
disc does not match the unit. The disc cannot be played back.)
• OPEN
• CLOSE
• NO DISC
NOTE
Even if you turn off the unit, the unit is not disconnected from the
AC power source as long as it is connected to the wall outlet. This
state is called standby mode. In this state, the unit consumes a
very small amount of power.
Initial setup
When you turn on the unit for the first time after purchase, the
following message appears on the TV screen.
You can set the display language, TV monitor type, analog audio
output and digital output before using the unit, by following the
procedure below.
• Refer to pages 37 and 38 for detailed explanation of each item
to be set in the following procedure.
1
Press ENTER.
The first page of the DVD PLAYER SET UP display appears.
The pull-down menu of the [ON SCREEN LANGUAGE] is
already open.
2
Press 5/∞ to select the desired language.
You can select the on-screen language for the preference
displays, etc. from among ENGLISH, SPANISH and
FRENCH.
3
Press ENTER.
The second page is shown, in which the pull-down menu of
the [MONITOR TYPE] is already open.
4
Press 5/∞ to select the desired monitor type.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].
For a wide-screen TV, select [16:9 NORMAL] or [16:9 AUTO].
(See page 37.)
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the
5/∞/2/3 and numeric buttons
for controlling the unit.
About invalid operation icon
When you press a button, and if the unit does not accept its
operation,
appears on your TV screen. Operations are
occasionally unacceptable even if is not displayed.
Note that some operations may not be accepted. For example,
some discs may not allow rapid advance/reverse or slow-
motion playback.
DVD STANDBY/
ON
ENTER
5/∞
3 0
DIMMER
3
TOP MENU
OPEN/CLOSE
STANDBY indicator
TV DVD
NOW READING
Message area
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER NO - CANCEL
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
MENU LANGUAGE ENGLISH
AUDIO LANGUAGE ENGLISH
SUBTITLE OFF
ON SCREEN LANGUAGE ENGLISH
DVD PLAYER SET UP
ENGLISH
SPANISH
FRENCH
ON SCREEN LANGUAGE options
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
MONITOR TYPE 4:3 L.B.
PICTURE SOURCE AUTO
SCREEN SAVER ON
MP3&WMA/JPEG MP3
DVD PLAYER SET UP
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
MONITOR TYPE options
XV-N70BK_N77SL(JUJ).book Page 10 Thursday, July 31, 2003 8:02 PM