JVC KV-DT2000 - Manual (Page 11)

11
ENGLISH
Available functions/options
Store the programs you frequently watch to the specified service group so that you can
access to the network without scanning through the spectrum every time when you
travel. (See also page 10 to select the available Service List.)
• You can also store the programs to your own specified groups (up to 17 groups) in
the Service List besides the pre-defined groups (Home, Office, and Travel).
Press and hold EPG until “New” appears, then change to your own specified name.
(See “Program Name” on page 10 for entering your specified name.)
To delete a group, select the desired group using 5/∞, then press and hold
FAVOURITE.
Home [Default], Offi ce , Travel (cannot be deleted nor edited)
Automatically searches for the entire VHF and UHF spectrum for available services.
Press ENTER to activate the search. (DO NOT press any button on the remote
controller during search.)
Spectrum [Default]
Manual Scan
You can search for a program by specifying the frequency and bandwidth.
Available functions/options
Select the place where you are now staying (see page 10 for the available Service
List).
Select a frequency for auto searching.
• You can also use the number buttons to enter the frequency. Press ENTER to
confirm.
174.000 MHz — 858.000 MHz [474.000 MHz : Default]
Select an appropriate bandwidth.
6 MHz , 7 MHz , 8 MHz [Default]
Select “Scan CH” after setting the above functions correctly. Press ENTER to start
scanning.
Spectrum [Default]
Available functions
Selected option
Available options
Operation instructions
Signal strength and
quality indicators
Service List (see page 10)
• Select the option you want
to display on this list.
EN02-13_KV-DT2000[E]f.indd 11 EN02-13_KV-DT2000[E]f.indd 11 9/22/05 6:55:08 PM 9/22/05 6:55:08 PM