Jensen VM9412 - Manual (Page 20)

16
VM9412
SETUP MENU
To access system settings, press the SETUP button (31) on
the remote control or touch the button on the screen to
enter the “SETUP” menu. The “GENERAL” sub-menu
appears highlighted in blue.
Accessing Menu Items
Touch the sub-menu name or use the joystick to select a sub-
menu (Language, Audio, RDS, etc.).
The features available for adjustment under the highlighted
sub-menu option will appear in the center of the screen.
Adjusting a Feature
1. Use the touchscreen or press the /\ or V buttons on the
joystick to select the feature to be adjusted.
2. Enter the option field for the feature you want to adjust
by using the touchscreen or pressing the ENTER
(joystick) button. A submenu appears in a second row
with the selected option highlighted in blue.
3. Select a new value by using the touchscreen or pressing
the /\ or V buttons on the joystick.
4. Use the touchscreen or press the ENTER (joystick)
button to confirm setup.
General Sub-menu Features
Language Sub-menu Features
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used.
Audio Sub-menu Features
Speaker Sub-menu Features
•
Choose 4 CH, 4.1 CH or 5.1 CH depending on the
speaker configuration in your vehicle.
• Use the Test Tone feature to verify speaker settings.
Make changes using the EQ/FAD-BAL menu, accessed
by pressing and holding the AUDIO button (volume
control).
• Sub.W Phase: Reverse the subwoofer signal polarity to
improve bass response related to speaker configuration.
RDS Sub-menu Features
Setting Options Function
Clock Mode 12 Hour Clock displays 12 hour time using
AM and PM.
24 Hour Clock displays 24 hour time up to
23:59.
RADIO RADIO SETUP
RDS
Rating
Hardware
P.VOL
TS Cal
General Language Audio Back
Clock Mode 12 Hour
Clock 04 : 31 AM
Video Input AUTO
Beep On
Speaker
DivX
Clock Adjust (HH:MM) The clock appears in the top right
corner of the screen and on the
LCD screen during certain opera-
tions. NOTE: The AM/PM indication
will change as you continue to
adjust the hour past 12.
Video Input
(Input cir-
cuitry autode-
tects the
video signal
from the Aux
In source). NTSC The color signals are output in the
standard NTSC format.
PAL The color signals are output in the
standard PAL format.
Auto The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
Beep On When turned on, an audible beep
tone confirms each function selec-
tion.
Off No beep sounds.
Setting Options Function
OSD English On Screen Display appears in
English.
DVD Audio English DVD Audio is heard in English
when the option is available.
Spanish DVD Audio is heard in Spanish
when the option is available.
French DVD Audio is heard in French when
the option is available.
DVD Subtitle English DVD subtitles automatically appear
in English when available.
Spanish DVD subtitles automatically appear
in Spanish when available.
French DVD subtitles automatically appear
in French when available.
Off DVD subtitles do not appear auto-
matically.
Disc Menu English DVD menu (if applicable) is dis-
played in English.
Spanish DVD menu (if applicable) is dis-
played in Spanish.
French DVD menu (if applicable) is dis-
played in French.
Setting Options Function
Setting Options Function
DRC Off Employ the Dynamic Range Control
for better playback for low volumes.
On
Audio Mode Surround Choose Stereo to send the same
signal to the front and rear left/right
speakers. If you have a center
speaker, you can choose the Sur-
round option when supported by
your media.
Stereo
Dolby Pro II Music Optimized for music reproduction
when playing music encoded in
Dolby.
Movie Optimized for video reproduction
when playing movies encoded in
Dolby.
Matrix Use with Dolby Matrix encoded
media.
Sub. W Filter 50Hz Selecting a crossover frequency
sets a cut-off frequency of the sub-
woofer's LPF (low-pass filter).
80Hz
100Hz
120Hz
150Hz
Setting Options Function
RDS On Unit will display Radio Data System
information when available.
Off
CT On Automatically synchronize the
radio’s time based on RDS radio
signals.
Off