JL Audio SB-T-TUNDC/8W7/GA - Manual (Page 3)

SB-T-TUNDC/8W7_INSTR_SKU#011247 SB-T-TUNDC/8W7_INSTR_SKU#011247
C O N G R A T U L A T I O N S
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
S T E P 1 3
Lower the rear seat and replace any removed contents.
S T E P 1 2
Using the factory bolt that was removed in STEP 4, secure
the L-bracket and the seat belts’ mount to the floor.
Page 3 • JL Audio, Inc 2007
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011247 -09-11-200 JLA-SKU#011247 -09-11-2007 7 • Printed in USA • ©2007 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100 w w w . j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
I N C L U D E D H A R D W A R E
(2) (2) 3/8-inch -16 x 1-inch Hex Bolt 3/8-inch -16 x 1-inch Hex Bolt
(2) (2) 3/8-inch Split Lock Washer 3/8-inch Split Lock Washer
(2) (2) 3/8-inch Flat Washer 3/8-inch Flat Washer
(2) (2) L-Bracket L-Bracket
S P E C I F I C A T I O N S
Enclosure Type: Bass Reflex (ported) Bass Reflex (ported)
Driver Type: 8W7 8W7
Nominal Impedance: 3 ohms mono 3 ohms mono
Continuous Power Handling: 300 Watts 300 Watts
P O W E R R E C O M M E N D A T I O N P O W E R R E C O M M E N D A T I O N
JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2
when being used to power your Stealthbox
® .
The JL Audio 250/1v2 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 6-inch x 9-inch / Front Doors 6-inch x 9-inch / Front Doors
Fits JL Audio Models**: *TR690-TXi & *VR690-CXi TR690-TXi & *VR690-CXi
Rear Speaker Size / Location: 6.5-inch / Rear Doors 6.5-inch / Rear Doors
Fits JL Audio Models: *TR650-CXi, *TR650-CSi, *VR650-CXi, *VR650-CSi, *XR650-CXi, XR650-CSi, *TR650-CXi, *TR650-CSi, *VR650-CXi, *VR650-CSi, *XR650-CXi, XR650-CSi,
*C5-650x, *C5-650 & *ZR650-CSi *C5-650x, *C5-650 & *ZR650-CSi
*Spacer ring is required for proper mounting. *Spacer ring is required for proper mounting.
**Other size speakers may be used, custom mounting ring is required. **Other size speakers may be used, custom mounting ring is required.