Jensen VM9213 User Manual
Vm9213
Installation Guide
Instruccionnes de Instalación
Instructions d'installation
VM9213
VM9213 Head Unit
Cosmetic Trim Ring
Wiring Harness Power/Speaker
Mounting Hardware
Single DIN Sleeve
Remote Control
Parking Brake Sensor Extension Wire
3.5mm Media Cable
SD Card to USB Adaptor
Touch Screen Cleaning Cloth
Owners Manual
Quick Reference Guide
What's in the Box
Tools and Supplies
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.
Para obtener instrucciones en Español, diríjase a la página 5. Pour des instructions en Francais, référez-vous à la page 9.
You will need these tools and supplies to install your VM9213:
Torx type, flat-head and Philips screwdrivers
Wire cutters and strippers
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 – 18 gauge speaker wire