JVC KS-FX433R - Manual (Page 10)

10
ENGLISH
PTY
• When you press PTY while listening to an FM station, the PTY indicator is
lit during reception of a PTY station and the PTY standby mode is engaged.
The PTY name stored on page 9 (for example: “CLASSICS”) flashes for 5
seconds.
Note:
When the station being received is not a PTY station, the “PTY” indicator flashes.
Press the
or button to engage the PTY standby mode. “SEARCH” appears in
the display, and PTY station search starts. When a PTY station is tuned in, “PTY” is
lit.
• If you are listening to a TAPE or CD and wish to hear a selected PTY
broadcast, press the PTY button to enter the PTY standby mode. (The
“PTY” indicator lights up.)
If the PTY starts broadcasting while the PTY standby mode is active, the
selected PTY name is displayed and the FM mode is engaged. The selected
PTY can then be heard.
Note:
To deactivate the PTY standby mode, press the PTY button again.
Setting and operating PTY standby mode
TP (Traffic Programme) button
Setting and operating TA (Traffic Announcement) standby mode
• When you press TP/RDS while listening to an FM station, the TP indicator
is lit during reception of a TP (Traffic Programme) station and the TA standby
mode is engaged.
Note:
When the station being received is not a TP station, the TP indicator flashes. Press
the
or button to engage the TA standby mode. “SEARCH” appears in the
display, and TP station search starts. When a TP station is tuned in, “TP” is lit.
• If you’re listening to a TAPE or CD and wish to hear a TA broadcast, press
the TP button to enter the TA standby mode. (The “TP” indicator lights up.)
If a TA programme starts broadcasting while the TA standby mode is active,
“TRAFFIC” is displayed and the FM mode is engaged. The volume increases
to the preset “TA VOL” level and the TA programme can be heard (see page
14).
Note:
To deactivate the TA standby mode, press the TP button again.
TP/RDS
EN04-15KS-FX433R[E]/2 98.12.2, 5:08 PM 10