JVC CA-MXGA3V - Manual (Page 9)

6
Getting Started
English
Connecting a TV
Connect a video cord (supplied) between the System’s VIDEO OUT terminal and the video input jack of your TV.
• Do not connect a cable between the LINE-OUT terminals and the audio input terminals of an external TV. If it is connected,
noise may be generated depending on the TV to be used.
Connecting External Equipment
Connect a signal cord (not supplied) between the System’s AUX-IN terminals and the output terminals of the external MD recorder, tape
deck, etc.
You can then listen to the external source through the System.
Connecting to the Wall Outlet
Plug the AC power cord into the wall outlet.
Now, your System is at your command!
DEMO Mode
When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.
To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops.
To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.
COMPU Play
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play
button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not
ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
Video cord (supplied)
TV (not supplied)
Signal cord (not supplied)
Pin-plug x 2 Pin-plug x 2
MD recorder, tape deck, etc. (not supplied)
CANCEL
/ DEMO (For 2 seconds)
On the Unit On the Remote Control
CD 6 button CD 6 button
FM/AM button FM/AM button
TAPE 3 button TAPE 3 button
AUX button AUX button
CD1, CD2 and CD 3 buttons CD1, CD2 and CD 3 buttons
CD Open/Close 0 button
MX-GA3V(US).book Page 6 Thursday, April 10, 2003 9:45 AM