JVC DLA-M5000SCU - Manual (Page 21)

21
POWER
R
RGB
Y/C
G H/C S
B V
RGB OUT
RS-232C
REMOTE
RGB IN-2 EXT. IN
RGB IN-1
Connecting to Various Devices (Cont.)
Connecting to Computer Devices
Before connection, be sure to turn off both the projector and computer devices.
• Read the manual which comes with each device thoroughly.
• Use the separately available computer connection cable. Also, prepare cables required for connecting the devices connected.
• Desktop type
• Note type
• Desktop type
To monitor connector
* There are some note types which do not allow the
computer’s LCD to work if an external display is connected.
With such a note type, the LCD display and external display
output need to be switched.
To monitor connector
• RGB output devices
Laser video disc player, etc.
Computer cable
(separately available)
T
o
RGB IN-2
Separate cable
(separately available)
To RGB IN-1
T
o
RGB OUT
To
V
T
o
H/Cs
Cable supplied with the
display (or separately
available)(D-sub 3-row
15-pin)
Display monitor
* When a monitor is connected to the
RGB OUT terminal, you can view the
video from the computer on the monitor.
To R
To G
To B
To V
To H/Cs
To R
To G
To B
M5000LU/SCU p.14-24 01.3.5, 15:05 21