Jensen BT250 - Manual (Page 14)

Bluetooth Car Kit User Manual
10
Resetting the Car Kit
The car kit may only connect to one phone at a time. However, it
may be paired with up to 4 phones. Resetting the car kit deletes all
pairings. To do so:
Press and hold the Answer/redial and Volume down at the same
time. You will hear a tone (pairing mode), continue holding the
buttons until you hear the second tone.
Transferring calls
To transfer a call from the BT250 to the phone, do the following.
Change the setting on the phone from BT250 to Handset. Follow
the documentation provided with your phone to access this setting.
To transfer a call from the phone to the BT250, press the
Answer/redial button.
Notes on using voice recognition
Voice recognition is a feature of your phone which enables you to
dial a number by simply saying a pre-recorded “voice tag”. Normally
when you set a voice tag, you speak directly into the phone. When
accessing this feature with the Car Kit, you may find it necessary to
re-record the voice tag while you are in the car. This will set not only