JA Audio 45 - Manual (Page 3)

USER MANUAL
SAFETY WARNINGS
• To prevent short circuits, this product should only be used inside and only in dry spaces. Do
not expose the components to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• Do not open the product: the device contains live parts. The product should only be
repaired or serviced by a qualified repairman
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case of
improper usage of the product or when the product is used for purposes other than
specified. Marmitek does not accept responsibility for additional damage other than
covered by the legal product responsibility.
• Adapters: Only connect the adapter to the mains after checking whether the mains voltage
is the same as the values on the identification tags. Never connect an adapter or power
cord when it is damaged. In that case, contact your supplier.
APPLICATIONS:
The Marmitek GIGAVIDEO 45 is designed to transmit audio and video signals, without
running wires.
There is a second radio transmission system providing a infra-red return path enabling you to
control your VCR or Satellite Receiver from a remote location.
• Watch a movie on any TV in your home without moving your VCR or running cables
• Watch satellite programs on any TV anywhere in your house
• Watch DVD movies from your PC on your TV in a remote location
• Listen to MP3 audio from your PC on your Hifi system in the livingroom
• Monitor your sleeping baby, eldery or disabled on your TV by using your videocamera or
CCD camera
• Make perfect demonstrations without wiring TV’s during trade-shows, seminars, etc.
1 SETTING UP THE GIGAVIDEO TRANSMITTER
1. Connect one set of Audio/Video cables to the VIDEO [C] and AUDIO [D] jacks of your
Marmitek GigaVideo Transmitter. Take care to match the colors of the plugs on the cable
with the jacks on the GigaVideo Transmitter.
2. Connect the other end of the cable to the Audio/Video OUT jacks of the video source you
want to transmit the signal from (e.g. your VCR, DVD, Satellite or TV: connecting the
transmitter to your VCR or Satellite receiver, allows you to choose channels independent from
your main TV). If your video source is equipped with a SCART connector use the SCART
Adapter labelled TRANSMITTER (the one with the extra wires attached on the side). If there
already is a SCART cable attached to the SCART connector of your source, un-plug it first.
3 GIGAVIDEO 45 ඀
20127_20060803_manual_giga45 17-08-2006 12:24 Pagina 3