JBM electronic C20 through C21 - Manual (Page 7)

Cables for Gateway 20 through 21 PAGE 6
© JBM Electronics Co. 1-800-489-7781 www.jbmelectronics.com
RJ-11 Straight
This table lists the required pins used in the Modem cable used to connect the Gateways
to an asynchronous modem. Pins should be connected from one RJ-11 connector to the
other without transpositions or other wiring changes.
Units Supported
• C21
JBM Electronics Part Number: N/A
RJ-11 MODEM CABLE
PIN DESCRIPTION
1 Unused
2 Tip
4 Ring
5 Unused
Used for connecting a modem to the C21