JVC AV-21CMT4 - Manual (Page 6)

6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1 Connecting the aerial
To install rod aerial
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VIDEO
AUDIO
VIDEO-1
INPUT OUTPUT
VIDEO
AUDIO
VIDEO-1 INPUT OUTPUT
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV
with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of
the TV with the video cable and audio cables. For details, see the manual of your VCR.
VIDEO
AUDIO
VIDEO-1
INPUT OUTPUT
To RF
output To audio/video
output
To aerial input
The illustration shown is just a sample. It may
not be same as your TV.
2 Connecting the compatible main plug
to the AC outlet.
3 Inserting batteries into the remote
control.
Insert two batteries by following the ª and
· polarities and inserting the · end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
4 Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
VHF/UHF outdoor aerial
Rear of the TV
VCR
indoor aerial
Rod aerial*
Aerial holder
VHF/UHF outdoor aerial
Rear of the TV
* For model 14” series only
GGT0037-001B-H_E_P02-15 7/22/04, 12:11 6