Installing batteries, English – JVC LET0088-001A User Manual

Page 7

Advertising
background image

English

XL-SV22BK

LET0088-001A

BEFORE USING FOR THE FIRST TIME

Putting batteries in the remote control

The battery compartment is located on the back of the remote control.

1. Insert a finger in the recess under the battery compartment

cover, and pull off the cover.

Installing batteries

2. Place the two accessory R6P (SUM-3)/AA (15F) batteries in

the remote control according to the polarity markings (“+” and
“–”) inside the compartment and on the batteries.

3. Insert the two tabs of the cover in their respective slots, and

snap the cover in place.

The batteries last about one year with normal use. If function of the
remote control become erratic, replace the batteries.

Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. Their
life will be shortened, they may burst or their contents may leak if they
are used improperly.

Remove batteries from the remote control if it is not going to be used
for a long period of time.

Remove dead batteries and dispose of them properly.

Never leave dead batteries lying around, take them apart, mix them
with other refuse, or throw them into an incinerator.

Never touch liquid that has leaked out of a battery.

Do not mix new and old batteries, or batteries of different types,
when replacing them.

Page 3

Advertising
This manual is related to the following products: