Console and modem ports, Compact flash card slot, Console and modem ports compact flash card slot – Juniper Networks NETSCREEN 200 User Manual
Page 11
The Front Panel
NetScreen-200 Series
5
Console and Modem Ports
The Console port is an RJ-45 serial console port connector, for vt100 terminal emulator
programs to perform local configuration and administration.
The Modem port is an RJ-45 serial console port connector, for establishing remote console
sessions using dialup connections through a 9600 bps modem connected via an RS-232
cable. Dialing into the modem establishes the dialup console connection.
The table below lists the RJ-45 to DB-9 adapter connection definitions. To employ a
standard UART port, both the console and the modem ports use this configuration.
Compact Flash Card Slot
The NetScreen-200 Series supports CompactFlash
™
cards with a variety of memory
capacities. NetScreen has tested SanDisk 96MB and 512MB cards. The NetScreen device
automatically detects the presence of a flash card and records the system log to it.
DB9 Signal
Abbreviation DTE
DCE
RJ-45
1
Data Carrier Detect
DCD
In
Out
NC
2
Received Data
RD
In
Out
3
3
Transmitted Data
TD
Out
In
6
4
Data Terminal Ready
DTR
Out
In
7
5
Signal Ground
SGND
N/A
N/A
4
6
Data Set Ready
DSR
In
Out
2
7
Request To Send
RTS
Out
In
8
8
Clear To Send
CTS
In
Out
1
9
Ring Indicator
RI
In
Out
NC