Jonsered LT2213 User Manual
Page 12
11
KEY PART
NO. NO.
DESCRIPTION
1
- - - - - -
Engine Briggs Model
No.
219807-1210-B1
2
532 17 97-58 Muffler
9
532 19 43-19 Keeper Belt Engine
12
532 14 01-86 Pulley Engine
15
532 40 75-45 Tank Fuel
18
532 43 02-20 Cap Asm
20
532 18 38-97 Control Throttle
21
532 41 63-58 Screw #10 x 0.750 BOS Thread
28
532 13 70-40 Fuel Line
29
532 13 71-80 Spark Arrester Kit
37
532 12 34-87 Clamp Hose
42
810 04 07-00 Washer Lock 7/16
45
873 51 04-00 Nut Keps Hex 1/4-20 unc
69
532 16 52-91 Gasket
79
532 19 23-34 Screw 5/16-18 x 3/4
84
817 06 06-20 Screw 3/8-16 x 1/4
85
532 17 39-37 Bolt Hex 7/16-20 x 4 Gr. 5
90
817 00 06-16 Screw 3/8-16 x 1
96
819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
97
817 67 04-12 Screw 1/4-20 x 3/4
105 532 44 06-74 Shield SRD LH
106 532 44 06-79 Shield SRD RH
108 532 43 16-89 Cover Pulley
122 532 42 19-22 Extension Drain Oil
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
TRACTOR - - MODEL NO. LT2213 (96041008702), PRODUCT NO. 960 41 00-87
ENGINE 24
24
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambi-
ent operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are
placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop
the rated gross power when used in a given piece of power equipment (actual “on-site” or net power). This difference is
due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-
engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher
rated power for this Series engine.