Janome DC 3050 - Manual (Page 34)

32
Knit Stitch
This stitch is recommended for sewing such fabrics as
synthetic knits and stretch velour as it provides the
greatest amount of elasticity and strength.
Sew along the fabric edge leaving an adequate seam
allowance. After sewing, trim off the seam allowance
close to the stitches.
For better sewing results, interfacing should be used on
the wrong side of fabric on stretch or
elastic fabrics.
Press auto-lock button while sewing the last pattern, and
machine will stop automatically after the last pattern is
finished.
Satin Stitch
Machine Settings
q Pattern: #13
w Presser foot: Zigzag foot A
q w
Machine Settings
q Pattern: #22 to #27
w Presser foot: Satin stitch foot F
DECORATIVE STITCHES
Shell Tucking
Machine Settings
q Pattern: #17
w Presser foot: Satin stitch foot F
e Thread tension: 6–8
Increase the needle thread tension to “6-8”.
Fold and stitch on the bias.
Place the folded edge of the fabric along the slit of
the foot so that the right swing of the needle falls off
the edge of the fabric to form tucks.
After sewing, open the fabric and iron tucks to one
side.
q w e
q w