More about this unit, Basic operations, Tuner operations – JVC GET0260-015A User Manual

Page 20: Disc operations

Advertising
background image

20

More about this unit

Basic operations

Turning on the power

• By pressing CD or FM/AM on the unit, you

can also turn on the power.

Turning off the power

• If you turn off the power while listening to a

disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.

Tuner operations

Storing stations in memory

• During SSM search...
– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in

No. 1 will be automatically tuned in.

• When storing a station manually, a previously

preset station is erased when a new station is
stored in the same preset number.

FM RDS operations

• Network-Tracking Reception requires two

types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate.

• If a Traffic Announcement is received, the

volume level (TA Volume) automatically
changes to the preset level.

Disc operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does

not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.

General

• This unit has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format.

• When a disc has been loaded, selecting “CD”

for the playback source starts disc play.

Inserting a disc

• When a disc is inserted upside down, the disc

automatically ejects.

• Do not insert 8 cm discs (single CD) and

unusual shape discs (heart, flower, etc.) into
the loading slot.

Playing a disc

• While fast-forwarding or reversing on an MP3

or WMA disc, you can only hear intermittent
sounds.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back only the files of the

same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.

• This unit can play back multi-session discs;

however, unclosed sessions will be skipped
while playing.

• Some CD-Rs or CD-RWs may not play

back on this unit because of their disc
characteristics, and for the following causes:

– Discs are dirty or scratched.
– Moisture condensation occurs on the lens

inside the unit.

– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are

written with “Packet Write” method.

– There are improper recording conditions

(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower
than that of regular CDs.

EN20-23_KD-G312[B]f.indd 20

EN20-23_KD-G312[B]f.indd 20

6/7/05 5:42:46 PM

6/7/05 5:42:46 PM

Advertising