Vm9020ts, Specifications – Jensen Mobile Multimedia DVD/MP3/WMA Receiver VM9020TS User Manual

Page 27

Advertising
background image

VM9020TS

25

SPECIFICATIONS

CEA Power Ratings

Main Amplifier
Power Output: 18 watts RMS X 4 channels into 4-ohms @ <
1% THD+N
Signal to Noise Ratio: 70dBA below reference. (Reference: 1
watt, 4-ohms)
Dynamic Power: 88 watts into 4-ohms, all channels driven
Frequency Response: 20Hz to 20kHz, -3dB. Aux input used
as source reference
Reference Supply Voltage: 14.4VDC
Center Amplifier
Power Output: 22 watts RMS X 1 channels into 4-ohms @ <
1% THD+N
Signal to Noise Ratio: 70dBA below reference. (Reference: 1
watt, 4-ohms)
Dynamic Power: 25 watts into 4-ohms, all channels driven
Frequency Response: 20Hz to 20kHz, -3dB
Reference Supply Voltage: 14.4VDC
DVD/CD Player
Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW,
CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD, VCD,
MPEG, JPEG, MP3/WMA files burned onto a DVD+R/W or
DVD-R/W and Kodak Picture CD
Signal to Noise Ratio: 95dBA
Dynamic Range: >95dB
Frequency Response: 20Hz to 20kHz, -3dB
Channel Separation: > 60dB @ 1kHz
D/A Converter(s): 6-channel high performance 24-bit,
192kHz, multi-bit Sigma Delta modulation. DAC supports
sample rates from 8~192kHz.
Electronic Skip Protection (ESP): 16Mbit high-speed flash
memory
DVD: 2-3 sec, CD-DA: 10 sec, MP3: 100 sec, WMA: 200 sec
(ESP time is approximate)

Video
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1kHz: 58dB
Image Rejection: 80dB
Stereo Separation @ 1kHz: 30dB
Frequency Response: 30Hz - 15kHz, -3dB
AM Tuner
Tuning Range: 530kHz - 1710kHz
Sensitivity (-20dB): 30uV
Signal to Noise Ratio @ 1kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2kHz, -3dB
Monitor
Screen Size: 6.5" (Measured diagonally), 16:9 Widescreen

6.1" (155mm) W X 3.51" (89.2mm) H

Screen Type: TFT Liquid Crystal Display (LCD), active matrix
Brightness: 400 cd/m2
Contrast Ratio: 350
Response Time: 15mS rise time, 25mS fall time
Resolution:

280, 800 sub pixels, 1200 (W) X 234 (H)

Viewing angle:

65 degrees left or right

40 degrees up

65 degrees down

Anti-glare screen
General
Auxiliary Input impedance: 10k
Power Supply: 11 to 16VDC, negative ground
Fuse: 10-amp, mini ATM type
Double-DIN chassis dimensions: 7" X 7" X 4" (178mm x
178mm x 100mm)

** Specifications subject to change without notice.

Advertising